New regulations force professional pilots in EU & US regions to make their drones digitally visible. We created Beacon, the add-on that makes drones instantly compliant with the latest DRI standards. Upgrade your existing drone without the need to purchase new aircraft.

Slap the Dronetag Beacon on and instantly enhance your drone with DRI capability. The tiny device transmits the drone location via Bluetooth up to a 3 km (1.86 miles) range.

Supported Regions

🇪🇺 European Union (ASD-STAN)

Compliant with prEN 4709-002, which requires Direct Remote Identification for drones above 250 grams flying below 120 meters in the Specific Category.

🇺🇸 USA (ASTM)

The Dronetag Beacon is approved by the FAA and compliant with ASTM F3411. This requires pilots to broadcast Remote ID when flying in FAA-recognized identification areas.

🌎 Other countries

As the Beacon transmits data via Bluetooth, it is usable anywhere in the world. All countries using ASD-STAN or ASTM standards are supported. Please check your local rules.

 16 Grams Packed with Technology

Dronetag Beacon is the bare minimum to fly your drone safe & compliant.

With the size of 2 chocolate bar squares (16 g / 0.56 oz), the Beacon swings open the door to the digital experience for drones of all sizes.

Everywhere, Everytime, Ever

Fit the Beacon to a nano-weight drone or large UAV. Its unparalleled battery life of up to 16 hours gives you enough time to accomplish the wildest missions. The reclosable dual lock fastener is strong enough to lift an average drone. Worldwide supported Bluetooth technology and the finest geolocations standards.

Dronetag App

Available on all devices

Manage your devices, check the airspace zones, plan your flights, inspect airborne drones around with their flight itineraries, and notify other pilots about any airspace hazards. All in one app - the Dronetag App.

Features

• All Data Snug and Secured

  With over-the-air firmware updates and data encryption, your information will be safe and neatly organized in the mobile app.

• Multiple geolocation standards

  Receiving signals from GPS, GLONASS, Galileo and SBAS for robust and reliable positioning.

• Instant Direct Remote ID upgrade

  Compliant with Direct / Broadcast Remote ID according to the prEN 4709-002 and ASTM F3411 standards.

• Internal Bluetooth & GNSS antennas

  With an option to add external Bluetooth antennas for better signal reception.

• Unparalleled up to 16 hours of battery life

  Or use your drone as the power source for carefree flying without hustling to charge several devices.

• Worry-free flight from take-off to landing

  Beacon warns other closed-by pilots about potential dangers during take-off, landing, or when free-fall is detected.

• Precise sensors onboard

  GNSS position estimation, pressure altitude measurement, and motion detection via accelerometer.

• MAVlink & DJI A3 support

  Professional DJI and Pixhawk flight controllers integration via our EXT port to connect to the drone’s flight data.

Want more information? Click here

Troubleshooting and User Manual - Dronetag